Package org.eclipse.rdf4j.repository

Interface RepositoryConnection

All Superinterfaces:
AutoCloseable
All Known Subinterfaces:
DelegatingRepositoryConnection, InterceptingRepositoryConnection, NotifyingRepositoryConnection
All Known Implementing Classes:
AbstractRepositoryConnection, CachingRepositoryConnection, ContextAwareConnection, DatasetRepositoryConnection, EndpointBase.ManagedRepositoryConnection, FedXRepositoryConnection, InterceptingRepositoryConnectionWrapper, LoggingRepositoryConnection, NotifyingRepositoryConnectionWrapper, PooledRepositoryConnection, RepositoryConnectionWrapper, SailRepositoryConnection, SPARQLConnection, TransactionalRepositoryConnection
public interface RepositoryConnection extends AutoCloseable
Main interface for updating data in and performing queries on an RDF4J Repository.

By default, a RepositoryConnection is in auto-commit mode, meaning that each operation corresponds to a single transaction on the underlying store. Multiple operations can be bundled in a single transaction by using begin() and commit/ rollback, which may improve performance considerably when dealing with many thousands of statements. Care should be taking to always properly close a RepositoryConnection after one is finished with it, to free up resources and avoid unnecessary locks.

RepositoryConnection is not guaranteed to be thread-safe. The recommended access pattern in a multithreaded application is to ensure that each thread creates/uses its own RepositoryConnections (which can be obtained from a shared Repository).

Several methods take a vararg argument that optionally specifies one or more contexts (named graphs) on which the method should operate. A vararg parameter is optional, it can be completely left out of the method call, in which case a method either operates on a provided statements context (if one of the method parameters is a statement or collection of statements), or operates on the repository as a whole, completely ignoring context. A vararg argument may also be 'null' (cast to Resource) meaning that the method operates on those statements which have no associated context only.

Examples: 

 
 // Ex 1: this method retrieves all statements that appear in either context1 or
 // context2, or both.
 RepositoryConnection.getStatements(null, null, null, true, context1, context2);

 // Ex 2: this method retrieves all statements that appear in the repository
 // (regardless of context).
 RepositoryConnection.getStatements(null, null, null, true);

 // Ex 3: this method retrieves all statements that have no associated context in
 // the repository.
 // Observe that this is not equivalent to the previous method call.
 RepositoryConnection.getStatements(null, null, null, true, (Resource)null);

 // Ex 4: this method adds a statement to the store. If the statement object
 // itself has a context (i.e. statement.getContext() != null) the statement is added
 // to that context. Otherwise, it is added without any associated context.
 RepositoryConnection.add(statement);

 // Ex 5: this method adds a statement to context1 in the store. It completely
 // ignores any context the statement itself has.
 RepositoryConnection.add(statement, context1);
Author:
Arjohn Kampman, Jeen Broekstra
See Also:

  • Method Details

    • getRepository

      Repository getRepository()
      Returns the Repository object to which this connection belongs.

    • setParserConfig

      void setParserConfig(ParserConfig config)
      Set the parser configuration this connection should use for RDFParser-based operations.
      Parameters:
      config - a Rio RDF Parser configuration.

    • getParserConfig

      ParserConfig getParserConfig()
      Returns the parser configuration this connection uses for Rio-based operations.
      Returns:
      a Rio RDF parser configuration.

    • getValueFactory

      ValueFactory getValueFactory()
      Gets a ValueFactory for this RepositoryConnection.
      Returns:
      A repository-specific ValueFactory.

    • isOpen

      boolean isOpen() throws RepositoryException
      Checks whether this connection is open. A connection is open from the moment it is created until it is closed.
      Throws:
      RepositoryException
      See Also:

    • close

      default void close() throws RepositoryException
      Closes the connection, freeing resources. If a transaction is active on the connection, all non-committed operations will be lost by actively calling rollback() on any active transactions.

      Implementation note: All implementations must override this method if they have any resources that they need to free.

      Specified by:
      close in interface AutoCloseable
      Throws:
      RepositoryException - If the connection could not be closed.

    • prepareQuery

      default Query prepareQuery(String query) throws RepositoryException, MalformedQueryException
      Prepares a SPARQL query for evaluation on this repository (optional operation). In case the query contains relative URIs that need to be resolved against an external base URI, one should use prepareQuery(QueryLanguage, String, String) instead.

      If you already know the type of query, using the more specific prepareTupleQuery(java.lang.String), prepareGraphQuery(java.lang.String) or prepareBooleanQuery(java.lang.String) is likely to be more efficient.

      Parameters:
      query - The query string, in SPARQL syntax.
      Returns:
      A query ready to be evaluated on this repository.
      Throws:
      MalformedQueryException - If the supplied query is malformed.
      UnsupportedOperationException - If the prepareQuery method is not supported by this repository.
      RepositoryException
      See Also:

    • prepareQuery

      Query prepareQuery(QueryLanguage ql, String query) throws RepositoryException, MalformedQueryException
      Prepares a query for evaluation on this repository (optional operation). In case the query contains relative URIs that need to be resolved against an external base URI, one should use prepareQuery(QueryLanguage, String, String) instead.

      If you already know the type of query, using the more specific prepareTupleQuery(java.lang.String), prepareGraphQuery(java.lang.String) or prepareBooleanQuery(java.lang.String) is likely to be more efficient.

      Parameters:
      ql - The query language in which the query is formulated.
      query - The query string.
      Returns:
      A query ready to be evaluated on this repository.
      Throws:
      MalformedQueryException - If the supplied query is malformed.
      UnsupportedQueryLanguageException - If the supplied query language is not supported.
      UnsupportedOperationException - If the prepareQuery method is not supported by this repository.
      RepositoryException

    • prepareQuery

      Query prepareQuery(QueryLanguage ql, String query, String baseURI) throws RepositoryException, MalformedQueryException
      Prepares a query for evaluation on this repository (optional operation).

      If you already know the type of query, using the more specific prepareTupleQuery(java.lang.String), prepareGraphQuery(java.lang.String) or prepareBooleanQuery(java.lang.String) is likely to be more efficient.

      Parameters:
      ql - The query language in which the query is formulated.
      query - The query string.
      baseURI - The base URI to resolve any relative URIs that are in the query against, can be null if the query does not contain any relative URIs.
      Returns:
      A query ready to be evaluated on this repository.
      Throws:
      MalformedQueryException - If the supplied query is malformed.
      UnsupportedQueryLanguageException - If the supplied query language is not supported.
      UnsupportedOperationException - If the prepareQuery method is not supported by this repository.
      RepositoryException

    • prepareTupleQuery

      default TupleQuery prepareTupleQuery(String query) throws RepositoryException, MalformedQueryException
      Prepares a SPARQL query that produces sets of value tuples, that is a SPARQL SELECT query. In case the query contains relative URIs that need to be resolved against an external base URI, one should use prepareTupleQuery(QueryLanguage, String, String) instead.
      Parameters:
      query - The query string, in SPARQL syntax.
      Returns:
      a TupleQuery ready to be evaluated on this RepositoryConnection.
      Throws:
      IllegalArgumentException - If the supplied query is not a tuple query.
      MalformedQueryException - If the supplied query is malformed.
      RepositoryException
      See Also:

    • prepareTupleQuery

      TupleQuery prepareTupleQuery(QueryLanguage ql, String query) throws RepositoryException, MalformedQueryException
      Prepares a query that produces sets of value tuples. In case the query contains relative URIs that need to be resolved against an external base URI, one should use prepareTupleQuery(QueryLanguage, String, String) instead.
      Parameters:
      ql - The query language in which the query is formulated.
      query - The query string.
      Returns:
      a TupleQuery ready to be evaluated on this RepositoryConnection.
      Throws:
      IllegalArgumentException - If the supplied query is not a tuple query.
      MalformedQueryException - If the supplied query is malformed.
      UnsupportedQueryLanguageException - If the supplied query language is not supported.
      RepositoryException

    • prepareTupleQuery

      TupleQuery prepareTupleQuery(QueryLanguage ql, String query, String baseURI) throws RepositoryException, MalformedQueryException
      Prepares a query that produces sets of value tuples.
      Parameters:
      ql - The query language in which the query is formulated.
      query - The query string.
      baseURI - The base URI to resolve any relative URIs that are in the query against, can be null if the query does not contain any relative URIs.
      Returns:
      a TupleQuery ready to be evaluated on this RepositoryConnection.
      Throws:
      IllegalArgumentException - If the supplied query is not a tuple query.
      MalformedQueryException - If the supplied query is malformed.
      UnsupportedQueryLanguageException - If the supplied query language is not supported.
      RepositoryException

    • prepareGraphQuery

      default GraphQuery prepareGraphQuery(String query) throws RepositoryException, MalformedQueryException
      Prepares SPARQL queries that produce RDF graphs, that is, SPARQL CONSTRUCT or DESCRIBE queries. In case the query contains relative URIs that need to be resolved against an external base URI, one should use prepareGraphQuery(QueryLanguage, String, String) instead.
      Parameters:
      query - The query string, in SPARQL syntax.
      Returns:
      a GraphQuery ready to be evaluated on this RepositoryConnection.
      Throws:
      IllegalArgumentException - If the supplied query is not a graph query.
      MalformedQueryException - If the supplied query is malformed.
      RepositoryException
      See Also:

    • prepareGraphQuery

      GraphQuery prepareGraphQuery(QueryLanguage ql, String query) throws RepositoryException, MalformedQueryException
      Prepares queries that produce RDF graphs. In case the query contains relative URIs that need to be resolved against an external base URI, one should use prepareGraphQuery(QueryLanguage, String, String) instead.
      Parameters:
      ql - The query language in which the query is formulated.
      query - The query string.
      Returns:
      a GraphQuery ready to be evaluated on this RepositoryConnection.
      Throws:
      IllegalArgumentException - If the supplied query is not a graph query.
      MalformedQueryException - If the supplied query is malformed.
      UnsupportedQueryLanguageException - If the supplied query language is not supported.
      RepositoryException

    • prepareGraphQuery

      GraphQuery prepareGraphQuery(QueryLanguage ql, String query, String baseURI) throws RepositoryException, MalformedQueryException
      Prepares queries that produce RDF graphs.
      Parameters:
      ql - The query language in which the query is formulated.
      query - The query string.
      baseURI - The base URI to resolve any relative URIs that are in the query against, can be null if the query does not contain any relative URIs.
      Returns:
      a GraphQuery ready to be evaluated on this RepositoryConnection.
      Throws:
      IllegalArgumentException - If the supplied query is not a graph query.
      MalformedQueryException - If the supplied query is malformed.
      UnsupportedQueryLanguageException - If the supplied query language is not supported.
      RepositoryException

    • prepareBooleanQuery

      default BooleanQuery prepareBooleanQuery(String query) throws RepositoryException, MalformedQueryException
      Prepares SPARQL queries that return true or false, that is, SPARQL ASK queries. In case the query contains relative URIs that need to be resolved against an external base URI, one should use prepareBooleanQuery(QueryLanguage, String, String) instead.
      Parameters:
      query - The query string, in SPARQL syntax.
      Returns:
      a BooleanQuery ready to be evaluated on this RepositoryConnection.
      Throws:
      IllegalArgumentException - If the supplied query is not a boolean query.
      MalformedQueryException - If the supplied SPARQL query is malformed.
      RepositoryException
      See Also:

    • prepareBooleanQuery

      BooleanQuery prepareBooleanQuery(QueryLanguage ql, String query) throws RepositoryException, MalformedQueryException
      Prepares queries that return true or false. In case the query contains relative URIs that need to be resolved against an external base URI, one should use prepareBooleanQuery(QueryLanguage, String, String) instead.
      Parameters:
      ql - The query language in which the query is formulated.
      query - The query string.
      Returns:
      a BooleanQuery ready to be evaluated on this RepositoryConnection.
      Throws:
      IllegalArgumentException - If the supplied query is not a boolean query.
      MalformedQueryException - If the supplied query is malformed.
      UnsupportedQueryLanguageException - If the supplied query language is not supported.
      RepositoryException

    • prepareBooleanQuery

      BooleanQuery prepareBooleanQuery(QueryLanguage ql, String query, String baseURI) throws RepositoryException, MalformedQueryException
      Prepares queries that return true or false.
      Parameters:
      ql - The query language in which the query is formulated.
      query - The query string.
      baseURI - The base URI to resolve any relative URIs that are in the query against, can be null if the query does not contain any relative URIs.
      Returns:
      a BooleanQuery ready to be evaluated on this RepositoryConnection.
      Throws:
      IllegalArgumentException - If the supplied query is not a boolean query.
      MalformedQueryException - If the supplied query is malformed.
      UnsupportedQueryLanguageException - If the supplied query language is not supported.
      RepositoryException

    • prepareUpdate

      default Update prepareUpdate(String update) throws RepositoryException, MalformedQueryException
      Prepares a SPARQL Update operation. In case the update string contains relative URIs that need to be resolved against an external base URI, one should use prepareUpdate(QueryLanguage, String, String) instead.
      Parameters:
      update - The update operation string, in SPARQL syntax.
      Returns:
      a Update ready to be executed on this RepositoryConnection.
      Throws:
      MalformedQueryException - If the supplied update operation string is malformed.
      RepositoryException
      See Also:

    • prepareUpdate

      Update prepareUpdate(QueryLanguage ql, String update) throws RepositoryException, MalformedQueryException
      Prepares an Update operation. In case the update string contains relative URIs that need to be resolved against an external base URI, one should use prepareUpdate(QueryLanguage, String, String) instead.
      Parameters:
      ql - The query language in which the update operation is formulated.
      update - The update operation string.
      Returns:
      a Update ready to be executed on this RepositoryConnection.
      Throws:
      MalformedQueryException - If the supplied update operation string is malformed.
      RepositoryException

    • prepareUpdate

      Update prepareUpdate(QueryLanguage ql, String update, String baseURI) throws RepositoryException, MalformedQueryException
      Prepares an Update operation.
      Parameters:
      ql - The query language in which the update operation is formulated.
      update - The update operation string.
      baseURI - The base URI to resolve any relative URIs that are in the update against, can be null if the update does not contain any relative URIs.
      Returns:
      a Update ready to be executed on this RepositoryConnection.
      Throws:
      MalformedQueryException - If the supplied update operation string is malformed.
      RepositoryException

    • getContextIDs

      RepositoryResult<Resource> getContextIDs() throws RepositoryException
      Gets all resources that are used as content identifiers. Care should be taken that the returned RepositoryResult is closed to free any resources that it keeps hold of.
      Returns:
      a RepositoryResult object containing Resources that are used as context identifiers.
      Throws:
      RepositoryException

    • getStatements

      default RepositoryResult<Statement> getStatements(Resource subj, IRI pred, Value obj, Resource... contexts) throws RepositoryException
      Gets all statements with a specific subject, predicate and/or object from the repository. The result is optionally restricted to the specified set of named contexts. If the repository supports inferencing, inferred statements will be included in the result.
      Parameters:
      subj - A Resource specifying the subject, or null for a wildcard.
      pred - A URI specifying the predicate, or null for a wildcard.
      obj - A Value specifying the object, or null for a wildcard.
      contexts - The context(s) to get the data from. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the entire repository.
      Returns:
      The statements matching the specified pattern. The result object is a RepositoryResult object, a lazy Iterator-like object containing Statements and optionally throwing a RepositoryException when an error when a problem occurs during retrieval.
      Throws:
      RepositoryException

    • getStatements

      RepositoryResult<Statement> getStatements(Resource subj, IRI pred, Value obj, boolean includeInferred, Resource... contexts) throws RepositoryException
      Gets all statements with a specific subject, predicate and/or object from the repository. The result is optionally restricted to the specified set of named contexts.
      Parameters:
      subj - A Resource specifying the subject, or null for a wildcard.
      pred - An IRI specifying the predicate, or null for a wildcard.
      obj - A Value specifying the object, or null for a wildcard.
      contexts - The context(s) to get the data from. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the entire repository.
      includeInferred - if false, no inferred statements are returned; if true, inferred statements are returned if available. The default is true.
      Returns:
      The statements matching the specified pattern. The result object is a RepositoryResult object, a lazy Iterator-like object containing Statements and optionally throwing a RepositoryException when an error when a problem occurs during retrieval.
      Throws:
      RepositoryException

    • hasStatement

      boolean hasStatement(Resource subj, IRI pred, Value obj, boolean includeInferred, Resource... contexts) throws RepositoryException
      Checks whether the repository contains statements with a specific subject, predicate and/or object, optionally in the specified contexts.
      Parameters:
      subj - A Resource specifying the subject, or null for a wildcard.
      pred - An IRI specifying the predicate, or null for a wildcard.
      obj - A Value specifying the object, or null for a wildcard.
      contexts - The context(s) the need to be searched. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the entire repository.
      includeInferred - if false, no inferred statements are considered; if true, inferred statements are considered if available
      Returns:
      true If a matching statement is in the repository in the specified context, false otherwise.
      Throws:
      RepositoryException

    • hasStatement

      boolean hasStatement(Statement st, boolean includeInferred, Resource... contexts) throws RepositoryException
      Checks whether the repository contains the specified statement, optionally in the specified contexts.
      Parameters:
      st - The statement to look for. Context information in the statement is ignored.
      contexts - The context(s) to get the data from. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the entire repository.
      includeInferred - if false, no inferred statements are considered; if true, inferred statements are considered if available
      Returns:
      true If the repository contains the specified statement, false otherwise.
      Throws:
      RepositoryException

    • exportStatements

      void exportStatements(Resource subj, IRI pred, Value obj, boolean includeInferred, RDFHandler handler, Resource... contexts) throws RepositoryException, RDFHandlerException
      Exports all statements with a specific subject, predicate and/or object from the repository, optionally from the specified contexts. This method supplies the RDFHandler with all namespace declarations available in the repository.
      Parameters:
      subj - The subject, or null if the subject doesn't matter.
      pred - The predicate, or null if the predicate doesn't matter.
      obj - The object, or null if the object doesn't matter.
      contexts - The context(s) to get the data from. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the entire repository.
      handler - The handler that will handle the RDF data.
      includeInferred - if false, no inferred statements are returned; if true, inferred statements are returned if available
      Throws:
      RDFHandlerException - If the handler encounters an unrecoverable error.
      RepositoryException

    • export

      void export(RDFHandler handler, Resource... contexts) throws RepositoryException, RDFHandlerException
      Exports all explicit statements in the specified contexts to the supplied RDFHandler. This method supplies the RDFHandler with all namespace declarations available in the repository.
      Parameters:
      contexts - The context(s) to get the data from. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the entire repository.
      handler - The handler that will handle the RDF data.
      Throws:
      RDFHandlerException - If the handler encounters an unrecoverable error.
      RepositoryException

    • size

      long size(Resource... contexts) throws RepositoryException
      Returns the number of (explicit) statements that are in the specified contexts in this repository.
      Parameters:
      contexts - The context(s) to get the data from. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the entire repository.
      Returns:
      The number of explicit statements from the specified contexts in this repository.
      Throws:
      RepositoryException

    • isEmpty

      boolean isEmpty() throws RepositoryException
      Returns true if this repository does not contain any (explicit) statements.
      Returns:
      true if this repository is empty, false otherwise.
      Throws:
      RepositoryException - If the repository could not be checked to be empty.

    • setAutoCommit

      @Deprecated void setAutoCommit(boolean autoCommit) throws RepositoryException
      Deprecated.
      As of release 2.7.0, use begin() instead.
      Enables or disables auto-commit mode for the connection. If a connection is in auto-commit mode, then all updates will be executed and committed as individual transactions. Otherwise, the updates are grouped into transactions that are terminated by a call to either commit() or rollback(). By default, new connections are in auto-commit mode.

      NOTE: If this connection is switched to auto-commit mode during a transaction, the transaction is committed.

      Throws:
      RepositoryException - In case the mode switch failed, for example because a currently active transaction failed to commit.
      See Also:

    • isAutoCommit

      @Deprecated boolean isAutoCommit() throws RepositoryException
      Deprecated.
      since 2.0. Use isActive() instead.
      Indicates if the connection is in auto-commit mode. The connection is in auto-commit mode when no transaction is currently active, that is, when:
      1. begin() has not been called or;
      2. commit() or rollback() have been called to finish the transaction.
      Throws:
      RepositoryException - If a repository access error occurs.

    • isActive

      boolean isActive() throws UnknownTransactionStateException, RepositoryException
      Indicates if a transaction is currently active on the connection. A transaction is active if begin() has been called, and becomes inactive after commit() or rollback() has been called.
      Returns:
      true iff a transaction is active, false iff no transaction is active.
      Throws:
      UnknownTransactionStateException - if the transaction state can not be determined. This can happen for instance when communication with a repository fails or times out.
      RepositoryException

    • setIsolationLevel

      void setIsolationLevel(IsolationLevel level) throws IllegalStateException
      Sets the transaction isolation level for the next transaction(s) on this connection. If the level is set to a value that is not supported by the underlying repository, this method will still succeed but a subsequent call to begin() will result in an exception.
      Parameters:
      level - the transaction isolation level to set.
      Throws:
      IllegalStateException - if the method is called while a transaction is already active.

    • getIsolationLevel

      IsolationLevel getIsolationLevel()
      Retrieves the current transaction isolation level of the connection.
      Returns:
      the current transaction isolation level.

    • begin

      void begin() throws RepositoryException
      Begins a new transaction, requiring commit() or rollback() to be called to end the transaction. The transaction will use the currently set isolation level for this connection.
      Throws:
      RepositoryException - If the connection could not start the transaction. One possible reason this may happen is if a transaction is already active on the current connection.
      See Also:

    • begin

      void begin(IsolationLevel level) throws RepositoryException
      Begins a new transaction with the supplied IsolationLevel, requiring commit() or rollback() to be called to end the transaction.
      Parameters:
      level - The IsolationLevel at which this transaction will operate. If set to null the default isolation level of the underlying store will be used. If the specified isolation level is not supported by the underlying store, it will attempt to use a supported compatible level instead.
      Throws:
      RepositoryException - If the connection could not start the transaction. Possible reasons this may happen are:
      • a transaction is already active on the current connection.
      • the specified IsolationLevel is not supported by the store, and no compatible level could be found.
      See Also:

    • begin

      default void begin(TransactionSetting... settings)
      Begins a new transaction with the supplied TransactionSetting, requiring commit() or rollback() to be called to end the transaction.
      Parameters:
      settings - The TransactionSetting (zero or more) for this transaction. If an isolation level is provided in the settings this will be used for the transaction. If none is provided then the default will be used. Behaviour of this method is undefined if more than one isolation level is provided. Behaviour of this method is undefined if one or more settings is null.
      Throws:
      RepositoryException - If the connection could not start the transaction. Possible reasons this may happen are:
      • a transaction is already active on the current connection.
      • the specified IsolationLevel is not supported by the store, and no compatible level could be found.
      Since:
      3.3.0
      See Also:

    • prepare

      default void prepare() throws RepositoryException
      Checks for an error state in the active transaction that would force the transaction to be rolled back. This is an optional call; calling or not calling this method should have no effect on the outcome of commit() or rollback(). A call to this method must be followed by (in the same thread) with a call to prepare() , commit(), rollback(), or close() . This method may be called multiple times within the same transaction by the same thread. If this method returns normally, the caller can reasonably expect that a subsequent call to commit() will also return normally. If this method returns with an exception the caller should treat the exception as if it came from a call to commit().
      Throws:
      UnknownTransactionStateException - If the transaction state can not be determined (this can happen for instance when communication between client and server fails or times-out). It does not indicate a problem with the integrity of the store.
      RepositoryException - If there is an active transaction and it cannot be committed.
      IllegalStateException - If the connection has been closed or prepare was already called by another thread.
      Since:
      3.5.0
      See Also:

    • commit

      void commit() throws RepositoryException
      Commits the active transaction. This operation ends the active transaction.
      Throws:
      UnknownTransactionStateException - if the transaction state can not be determined. This can happen for instance when communication with a repository fails or times out.
      RepositoryException - If the connection could not be committed, or if the connection does not have an active transaction.
      See Also:

    • rollback

      void rollback() throws RepositoryException
      Rolls back all updates in the active transaction. This operation ends the active transaction.
      Throws:
      UnknownTransactionStateException - if the transaction state can not be determined. This can happen for instance when communication with a repository fails or times out.
      RepositoryException - If the transaction could not be rolled back, or if the connection does not have an active transaction.
      See Also:

    • add

      default void add(InputStream in, RDFFormat dataFormat, Resource... contexts) throws IOException, RDFParseException, RepositoryException
      Adds RDF data from an InputStream to the repository, optionally to one or more named contexts.
      Parameters:
      in - An InputStream from which RDF data can be read.
      dataFormat - The serialization format of the data.
      contexts - The contexts to add the data to. If one or more contexts are supplied the method ignores contextual information in the actual data. If no contexts are supplied the contextual information in the input stream is used, if no context information is available the data is added without any context.
      Throws:
      IOException - If an I/O error occurred while reading from the input stream.
      UnsupportedRDFormatException - If no parser is available for the specified RDF format.
      RDFParseException - If an error was found while parsing the RDF data.
      RepositoryException - If the data could not be added to the repository, for example because the repository is not writable.
      Since:
      3.5.0

    • add

      void add(InputStream in, String baseURI, RDFFormat dataFormat, Resource... contexts) throws IOException, RDFParseException, RepositoryException
      Adds RDF data from an InputStream to the repository, optionally to one or more named contexts.
      Parameters:
      in - An InputStream from which RDF data can be read.
      baseURI - The base URI to resolve any relative URIs that are in the data against. May be null.

      Note that if the data contains an embedded base URI, that embedded base URI will overrule the value supplied here (see RFC 3986 section 5.1 for details).

      dataFormat - The serialization format of the data.
      contexts - The contexts to add the data to. If one or more contexts are supplied the method ignores contextual information in the actual data. If no contexts are supplied the contextual information in the input stream is used, if no context information is available the data is added without any context.
      Throws:
      IOException - If an I/O error occurred while reading from the input stream.
      UnsupportedRDFormatException - If no parser is available for the specified RDF format.
      RDFParseException - If an error was found while parsing the RDF data.
      RepositoryException - If the data could not be added to the repository, for example because the repository is not writable.

    • add

      default void add(Reader reader, RDFFormat dataFormat, Resource... contexts) throws IOException, RDFParseException, RepositoryException
      Adds RDF data from a Reader to the repository, optionally to one or more named contexts. Note: using a Reader to upload byte-based data means that you have to be careful not to destroy the data's character encoding by enforcing a default character encoding upon the bytes. If possible, adding such data using an InputStream is to be preferred.
      Parameters:
      reader - A Reader from which RDF data can be read.
      dataFormat - The serialization format of the data.
      contexts - The contexts to add the data to. If one or more contexts are specified the data is added to these contexts, ignoring any context information in the data itself.
      Throws:
      IOException - If an I/O error occurred while reading from the reader.
      UnsupportedRDFormatException - If no parser is available for the specified RDF format.
      RDFParseException - If an error was found while parsing the RDF data.
      RepositoryException - If the data could not be added to the repository, for example because the repository is not writable.
      Since:
      3.5.0

    • add

      void add(Reader reader, String baseURI, RDFFormat dataFormat, Resource... contexts) throws IOException, RDFParseException, RepositoryException
      Adds RDF data from a Reader to the repository, optionally to one or more named contexts. Note: using a Reader to upload byte-based data means that you have to be careful not to destroy the data's character encoding by enforcing a default character encoding upon the bytes. If possible, adding such data using an InputStream is to be preferred.
      Parameters:
      reader - A Reader from which RDF data can be read.
      baseURI - The base URI to resolve any relative URIs that are in the data against. May be null.

      Note that if the data contains an embedded base URI, that embedded base URI will overrule the value supplied here (see RFC 3986 section 5.1 for details).

      dataFormat - The serialization format of the data.
      contexts - The contexts to add the data to. If one or more contexts are specified the data is added to these contexts, ignoring any context information in the data itself.
      Throws:
      IOException - If an I/O error occurred while reading from the reader.
      UnsupportedRDFormatException - If no parser is available for the specified RDF format.
      RDFParseException - If an error was found while parsing the RDF data.
      RepositoryException - If the data could not be added to the repository, for example because the repository is not writable.

    • add

      default void add(URL url, Resource... contexts) throws IOException, RDFParseException, RepositoryException
      Adds the RDF data that can be found at the specified URL to the repository, optionally to one or more named contexts.
      Parameters:
      url - The URL of the RDF data.
      contexts - The contexts to add the data to. If one or more contexts are specified the data is added to these contexts, ignoring any context information in the data itself.
      Throws:
      IOException - If an I/O error occurred while reading from the URL.
      UnsupportedRDFormatException - If the RDF format could not be recognized.
      RDFParseException - If an error was found while parsing the RDF data.
      RepositoryException - If the data could not be added to the repository, for example because the repository is not writable.
      Since:
      3.5.0

    • add

      default void add(URL url, RDFFormat dataFormat, Resource... contexts) throws IOException, RDFParseException, RepositoryException
      Adds the RDF data that can be found at the specified URL to the repository, optionally to one or more named contexts.
      Parameters:
      url - The URL of the RDF data.
      dataFormat - The serialization format of the data. If set to null, the format will be automatically determined by examining the content type in the HTTP response header, and failing that, the file name extension of the supplied URL.
      contexts - The contexts to add the data to. If one or more contexts are specified the data is added to these contexts, ignoring any context information in the data itself.
      Throws:
      IOException - If an I/O error occurred while reading from the URL.
      UnsupportedRDFormatException - If no parser is available for the specified RDF format, or the RDF format could not be automatically determined.
      RDFParseException - If an error was found while parsing the RDF data.
      RepositoryException - If the data could not be added to the repository, for example because the repository is not writable.
      Since:
      3.5.0

    • add

      void add(URL url, String baseURI, RDFFormat dataFormat, Resource... contexts) throws IOException, RDFParseException, RepositoryException
      Adds the RDF data that can be found at the specified URL to the repository, optionally to one or more named contexts.
      Parameters:
      url - The URL of the RDF data.
      baseURI - The base URI to resolve any relative URIs that are in the data against. This defaults to the value of url.toExternalForm() if the value is set to null.

      Note that if the data contains an embedded base URI, that embedded base URI will overrule the value supplied here (see RFC 3986 section 5.1 for details).

      dataFormat - The serialization format of the data. If set to null, the format will be automatically determined by examining the content type in the HTTP response header, and failing that, the file name extension of the supplied URL.
      contexts - The contexts to add the data to. If one or more contexts are specified the data is added to these contexts, ignoring any context information in the data itself.
      Throws:
      IOException - If an I/O error occurred while reading from the URL.
      UnsupportedRDFormatException - If no parser is available for the specified RDF format, or the RDF format could not be automatically determined.
      RDFParseException - If an error was found while parsing the RDF data.
      RepositoryException - If the data could not be added to the repository, for example because the repository is not writable.

    • add

      default void add(File file, Resource... contexts) throws IOException, RDFParseException, RepositoryException
      Adds RDF data from the specified file to a specific contexts in the repository.
      Parameters:
      file - A file containing RDF data.
      contexts - The contexts to add the data to. Note that this parameter is a vararg and as such is optional. If no contexts are specified, the data is added to any context specified in the actual data file, or if the data contains no context, it is added without context. If one or more contexts are specified the data is added to these contexts, ignoring any context information in the data itself.
      Throws:
      IOException - If an I/O error occurred while reading from the file.
      UnsupportedRDFormatException - If the RDF format of the supplied file could not be recognized.
      RDFParseException - If an error was found while parsing the RDF data.
      RepositoryException - If the data could not be added to the repository, for example because the repository is not writable.
      Since:
      3.5.0

    • add

      default void add(File file, RDFFormat dataFormat, Resource... contexts) throws IOException, RDFParseException, RepositoryException
      Adds RDF data from the specified file to a specific contexts in the repository.
      Parameters:
      file - A file containing RDF data.
      dataFormat - The serialization format of the data. If set to null, the format will be automatically determined by examining the file name extension of the supplied File.
      contexts - The contexts to add the data to. Note that this parameter is a vararg and as such is optional. If no contexts are specified, the data is added to any context specified in the actual data file, or if the data contains no context, it is added without context. If one or more contexts are specified the data is added to these contexts, ignoring any context information in the data itself.
      Throws:
      IOException - If an I/O error occurred while reading from the file.
      UnsupportedRDFormatException - If no parser is available for the specified RDF format.
      RDFParseException - If an error was found while parsing the RDF data.
      RepositoryException - If the data could not be added to the repository, for example because the repository is not writable.
      Since:
      3.5.0

    • add

      void add(File file, String baseURI, RDFFormat dataFormat, Resource... contexts) throws IOException, RDFParseException, RepositoryException
      Adds RDF data from the specified file to a specific contexts in the repository.
      Parameters:
      file - A file containing RDF data.
      baseURI - The base URI to resolve any relative URIs that are in the data against. This defaults to the value of file.toURI() if the value is set to null.

      Note that if the data contains an embedded base URI, that embedded base URI will overrule the value supplied here (see RFC 3986 section 5.1 for details).

      dataFormat - The serialization format of the data. If set to null, the format will be automatically determined by examining the file name extension of the supplied File.
      contexts - The contexts to add the data to. Note that this parameter is a vararg and as such is optional. If no contexts are specified, the data is added to any context specified in the actual data file, or if the data contains no context, it is added without context. If one or more contexts are specified the data is added to these contexts, ignoring any context information in the data itself.
      Throws:
      IOException - If an I/O error occurred while reading from the file.
      UnsupportedRDFormatException - If no parser is available for the specified RDF format.
      RDFParseException - If an error was found while parsing the RDF data.
      RepositoryException - If the data could not be added to the repository, for example because the repository is not writable.

    • add

      void add(Resource subject, IRI predicate, Value object, Resource... contexts) throws RepositoryException
      Adds a statement with the specified subject, predicate and object to this repository, optionally to one or more named contexts.
      Parameters:
      subject - The statement's subject.
      predicate - The statement's predicate.
      object - The statement's object.
      contexts - The contexts to add the data to. Note that this parameter is a vararg and as such is optional. If no contexts are specified, the data is added to any context specified in the actual data file, or if the data contains no context, it is added without context. If one or more contexts are specified the data is added to these contexts, ignoring any context information in the data itself.
      Throws:
      RepositoryException - If the data could not be added to the repository, for example because the repository is not writable.

    • add

      void add(Statement st, Resource... contexts) throws RepositoryException
      Adds the supplied statement to this repository, optionally to one or more named contexts.
      Parameters:
      st - The statement to add.
      contexts - The contexts to add the statements to. Note that this parameter is a vararg and as such is optional. If no contexts are specified, the statement is added to any context specified in each statement, or if the statement contains no context, it is added without context. If one or more contexts are specified the statement is added to these contexts, ignoring any context information in the statement itself.
      Throws:
      RepositoryException - If the statement could not be added to the repository, for example because the repository is not writable.

    • add

      void add(Iterable<? extends Statement> statements, Resource... contexts) throws RepositoryException
      Adds the supplied statements to this repository, optionally to one or more named contexts.
      Parameters:
      statements - The statements that should be added.
      contexts - The contexts to add the statements to. Note that this parameter is a vararg and as such is optional. If no contexts are specified, each statement is added to any context specified in the statement, or if the statement contains no context, it is added without context. If one or more contexts are specified each statement is added to these contexts, ignoring any context information in the statement itself. ignored.
      Throws:
      RepositoryException - If the statements could not be added to the repository, for example because the repository is not writable.

    • add

      @Deprecated(since="4.1.0", forRemoval=true) <E extends Exception> void add(Iteration<? extends Statement,E> statements, Resource... contexts) throws RepositoryException, E
      Deprecated, for removal: This API element is subject to removal in a future version.
      Adds the supplied statements to this repository, optionally to one or more named contexts.
      Parameters:
      statements - The statements to add. In case the iteration is a CloseableIteration, it will be closed before this method returns.
      contexts - The contexts to add the statements to. Note that this parameter is a vararg and as such is optional. If no contexts are specified, each statement is added to any context specified in the statement, or if the statement contains no context, it is added without context. If one or more contexts are specified each statement is added to these contexts, ignoring any context information in the statement itself. ignored.
      Throws:
      RepositoryException - If the statements could not be added to the repository, for example because the repository is not writable.
      E extends Exception

    • add

      default <E extends Exception> void add(CloseableIteration<? extends Statement,E> statements, Resource... contexts) throws RepositoryException, E
      Adds the supplied statements to this repository, optionally to one or more named contexts.
      Parameters:
      statements - The statements to add. The iteration will be closed.
      contexts - The contexts to add the statements to. Note that this parameter is a vararg and as such is optional. If no contexts are specified, each statement is added to any context specified in the statement, or if the statement contains no context, it is added without context. If one or more contexts are specified each statement is added to these contexts, ignoring any context information in the statement itself. ignored.
      Throws:
      RepositoryException - If the statements could not be added to the repository, for example because the repository is not writable.
      E extends Exception

    • add

      default void add(RepositoryResult<Statement> statements, Resource... contexts) throws RepositoryException
      Adds the supplied statements to this repository, optionally to one or more named contexts.
      Parameters:
      statements - The statements to add. The @{link RepositoryResult} will be closed before this method returns.
      contexts - The contexts to add the statements to. Note that this parameter is a vararg and as such is optional. If no contexts are specified, each statement is added to any context specified in the statement, or if the statement contains no context, it is added without context. If one or more contexts are specified each statement is added to these contexts, ignoring any context information in the statement itself. ignored.
      Throws:
      RepositoryException - If the statements could not be added to the repository, for example because the repository is not writable.

    • remove

      void remove(Resource subject, IRI predicate, Value object, Resource... contexts) throws RepositoryException
      Removes the statement(s) with the specified subject, predicate and object from the repository, optionally restricted to the specified contexts.
      Parameters:
      subject - The statement's subject, or null for a wildcard.
      predicate - The statement's predicate, or null for a wildcard.
      object - The statement's object, or null for a wildcard.
      contexts - The context(s) to remove the data from. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the entire repository.
      Throws:
      RepositoryException - If the statement(s) could not be removed from the repository, for example because the repository is not writable.

    • remove

      void remove(Statement st, Resource... contexts) throws RepositoryException
      Removes the supplied statement from the specified contexts in the repository.
      Parameters:
      st - The statement to remove.
      contexts - The context(s) to remove the data from. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the contexts associated with the statement itself, and if no context is associated with the statement, on the entire repository.
      Throws:
      RepositoryException - If the statement could not be removed from the repository, for example because the repository is not writable.

    • remove

      void remove(Iterable<? extends Statement> statements, Resource... contexts) throws RepositoryException
      Removes the supplied statements from the specified contexts in this repository.
      Parameters:
      statements - The statements that should be added.
      contexts - The context(s) to remove the data from. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the contexts associated with the statement itself, and if no context is associated with the statement, on the entire repository.
      Throws:
      RepositoryException - If the statements could not be added to the repository, for example because the repository is not writable.

    • remove

      @Deprecated(since="4.1.0", forRemoval=true) <E extends Exception> void remove(Iteration<? extends Statement,E> statements, Resource... contexts) throws RepositoryException, E
      Deprecated, for removal: This API element is subject to removal in a future version.
      Removes the supplied statements from a specific context in this repository, ignoring any context information carried by the statements themselves.
      Parameters:
      statements - The statements to remove. In case the iteration is a CloseableIteration, it will be closed before this method returns.
      contexts - The context(s) to remove the data from. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the contexts associated with the statement itself, and if no context is associated with the statement, on the entire repository.
      Throws:
      RepositoryException - If the statements could not be removed from the repository, for example because the repository is not writable.
      E extends Exception

    • remove

      default <E extends Exception> void remove(CloseableIteration<? extends Statement,E> statements, Resource... contexts) throws RepositoryException, E
      Removes the supplied statements from a specific context in this repository, ignoring any context information carried by the statements themselves.
      Parameters:
      statements - The statements to remove. The iteration will be closed.
      contexts - The context(s) to remove the data from. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the contexts associated with the statement itself, and if no context is associated with the statement, on the entire repository.
      Throws:
      RepositoryException - If the statements could not be removed from the repository, for example because the repository is not writable.
      E extends Exception

    • remove

      default void remove(RepositoryResult<Statement> statements, Resource... contexts) throws RepositoryException
      Removes the supplied statements from a specific context in this repository, ignoring any context information carried by the statements themselves.
      Parameters:
      statements - The statements to remove. The RepositoryResult will be closed before this method returns.
      contexts - The context(s) to remove the data from. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the contexts associated with the statement itself, and if no context is associated with the statement, on the entire repository.
      Throws:
      RepositoryException - If the statements could not be removed from the repository, for example because the repository is not writable.

    • clear

      void clear(Resource... contexts) throws RepositoryException
      Removes all statements from a specific contexts in the repository.
      Parameters:
      contexts - The context(s) to remove the data from. Note that this parameter is a vararg and as such is optional. If no contexts are supplied the method operates on the entire repository.
      Throws:
      RepositoryException - If the statements could not be removed from the repository, for example because the repository is not writable.

    • getNamespaces

      RepositoryResult<Namespace> getNamespaces() throws RepositoryException
      Gets all declared namespaces as a RepositoryResult of Namespace objects. Each Namespace object consists of a prefix and a namespace name.
      Returns:
      A RepositoryResult containing Namespace objects. Care should be taken to close the RepositoryResult after use.
      Throws:
      RepositoryException - If the namespaces could not be read from the repository.

    • getNamespace

      String getNamespace(String prefix) throws RepositoryException
      Gets the namespace that is associated with the specified prefix, if any.
      Parameters:
      prefix - A namespace prefix, or an empty string in case of the default namespace.
      Returns:
      The namespace name that is associated with the specified prefix, or null if there is no such namespace.
      Throws:
      RepositoryException - If the namespace could not be read from the repository.
      NullPointerException - In case prefix is null.

    • setNamespace

      void setNamespace(String prefix, String name) throws RepositoryException
      Sets the prefix for a namespace.
      Parameters:
      prefix - The new prefix, or an empty string in case of the default namespace.
      name - The namespace name that the prefix maps to.
      Throws:
      RepositoryException - If the namespace could not be set in the repository, for example because the repository is not writable.
      NullPointerException - In case prefix or name is null.

    • removeNamespace

      void removeNamespace(String prefix) throws RepositoryException
      Removes a namespace declaration by removing the association between a prefix and a namespace name.
      Parameters:
      prefix - The namespace prefix, or an empty string in case of the default namespace.
      Throws:
      RepositoryException - If the namespace prefix could not be removed.
      NullPointerException - In case prefix is null.

    • clearNamespaces

      void clearNamespaces() throws RepositoryException
      Removes all namespace declarations from the repository.
      Throws:
      RepositoryException - If the namespace declarations could not be removed.